Max Protractor 1.1.9.AF

It is an application designed for measuring angles using various methods.

Main Function

1. Various measuring methods: Gravity Sensor, Camera, Touch, Magnetic Sensor, etc.
2. Calibration: The calibration function facilitates easy and accurate angle measurement when using sensors.

Instructions

1. Plumb Mode
   1. Place the device parallel to the baseline of the object being measured.
   2. If needed, activate the Camera by tapping the Camera button in the upper-right corner of the screen.
   3. Read the tilted angle displayed on the upper-left side of the screen.
2. Frame Mode
   1. Position the device parallel to the baseline of the object being measured.
   2. If desired, turn on the Camera by tapping the Camera button in the upper-right corner of the screen.
   3. Read the tilted angle displayed on the upper-left side of the screen.
3. Inclination Mode
   1. Contact your device on the slope.
4. Touch Mode
   1. Set the device parallel to the baseline of the object being measured.
   2. If necessary, enable the Camera by tapping the Camera button in the upper-right corner of the screen.
   3. Touch the measured point and check the angle value on the screen.
5. Plane Angle Mode
   1. Position the device parallel to the baseline of the object being measured.
   2. Calibrate the measuring value.
   3. Rotate the device to measure angles and verify the angle value on the screen.

Reference

• Some devices may experience difficulty measuring when battery levels are low, especially in Plane Angle Mode due to magnetic sensor restrictions.
• A tolerance may be observed due to sensor accuracy variations across different devices.